Monday, June 15, 2015

BMW R 1200 R motorcycle full specification

BMW R 1200 R

Engine
Type Air/liquid-cooled four stroke flat twin engine, double overhead camshaft, one balance shaft
Bore x stroke 101 mm x 73 mm
Capacity 1,170 cc
Rated output 125 hp (92 kW) at 7,750 rpm
Max. torque 92 lb-ft (125 Nm) at 6,500 rpm
Compression ratio 12.5 : 1
Mixture control / engine management Electronic intake pipe injection
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3
Performance / fuel consumption
Maximum speed over 125 mph
Fuel consumption per 100 km at constant 90 km/h 60 mpg at a constant 55 mph
Fuel consumption per 100 km at constant 120 km/h
Fuel type Premium Unleaded
Electrical system
Alternator three-phase alternator 508 W (nominal power)
Battery 12 V / 12 Ah, maintenance-free
Power transmission
Clutch oil lubricated clutch, hydraulically operated
Gearbox Constant mesh 6-speed gearbox with helical gear teeth
Drive Shaft drive
Chassis / brakes
Frame Two-section frame consisting of front- and bolted on rear frame, load-bearing engine
Front wheel location / suspension Telescopic Upside-Down fork; stanchion diameter 45 mm
Rear wheel location / suspension Cast aluminum single-sided swing arm with BMW Motorrad Paralever; WAD strut (travel-related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable
Suspension travel front / rear 5.5 in / 5.5 in (140 mm / 140 mm)
Wheelbase 59.7 in (1,515 mm)
Castor 4.9 in (125.6 mm)
Steering head angle 62.3°
Wheels Cast aluminum wheels
Rim, front 3.50 x 17"
Rim, rear 5.50 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 180/55 ZR 17
Brake, front Dual disc brake, floating brake discs, diameter 320 mm, 4-piston fixed calipers
Brake, rear Single disc brake, diameter 276 mm, double-piston floating caliper
ABS BMW Motorrad Integral ABS (part-integral, can be switched off)
Dimensions / weights
Length 85.3 in (2,165 mm)
Width (incl. mirrors) 34.7 in (880 mm)
Height (excl. mirrors) 51.2 in (1,300 mm)
Seat height, unladen weight 31.1 inches Standard; variable seat heights available between 29.9 inches and 32.3 inches (available as accessories and/or factory options, see an authorized BMW Motorrad dealer)
Inner leg curve, unladen weight 70.1 inches Standard; variable inner leg curve (inseam) between 67.8 and 72.3 inches (seats available as accessories and/or factory options, see an authorized BMW Motorrad dealer)
Unladen weight, road ready, fully fuelled 1) 508 lbs (231 kg)
Dry weight
Permitted total weight 990 lbs (450 kg)
Payload (with standard equipment) 483 lbs (219 kg)
Usable tank volume 4.7 gal (18 l)
Reserve approx. 1 gal

  • Technical data relate to the unladen weight (DIN)
  • 1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume

No comments :

Post a Comment

Popular Posts